Centramatic 300-318 Dodge/Ford 3/4 & 1 Ton Single Rear Wheel (SET OF 4)

Description

SET OF 4 - 300-318A (2) and 300-318B (2). -   Up for sale is a set of 4 of Centramatic Auto Wheel balancer for Dodge/Ford 3/4 and 1 ton Single Rear wheel (GM 1995 and Older) Kit
consists of 2 300-318A, 2 300-318B and 2 Aluminium adapter plates that allow fitment of both above applications.
*** Due to variances between models, we may not be able to fit all applications ***
Model #:
300-318
Vehicle Type:
Light Duty Trucks
Bus/Motorhome
Trailers/RVs
Axle:
N/A
Wheel Size:
16-20 in.
Bolt Holes:
8
Bolt Circle:
6.5 & 170mm
Why Centramatic Balancers?
Smoother Ride
Increases tire life 25%-50%
Reduces vibration
Helps prevent tire cupping
No pre-balancing required
Lower tire operating temps 8%-10%
Five Year Warranty
How do they work?
By using centrifugal force the free moving weights (durametal and synthetic fluid) sealed in the balancer automatically distributes to exactly where needed, placing the assembly in equilibrium or perfect balance. When a sprung assembly is out of balance, deflection is caused via the springs or tire sidewalls. These free moving weights sense this deflection and move opposite the heavy points to balance the entire assembly, wheels, tires, drums, hubs, even mud, snow or ice stuck to the wheels.
What about mis-mounted tires or improperly seated beads?
This problem can be found by inspecting the area where the wheel and tire meet. A guide rib or circumference ring is molded into the sidewall of the tire. Measure the distance from the wheel to the guide rib (approx. ½ inch depending on tire brand), at the top, bottom and both sides, a variance in this distance indicates a mis-mount. A mis-mounted tire will roll out of round. This leads to erratic tire wear and vibration, regardless of how well it is balanced. Reseating the bead properly corrects the problem.
What is inside the rings?
Our balancing media consists of two parts. Part one is durametal, a hardened alloy similar to shot but 10 times harder. This is primary media, as a solid cannot change shape or form under centrifugal force. It remains exactly where needed under high speed. Part two, the dampening fluid is proprietary synthetic oil, designed to operate in the most extreme environments. The rings are about 1/3 full of this fluid. Its function is to lubricate, dampen vibration and help balance. However, a liquid alone would merely flatten out under centrifugal force at high speed and be forced back around the ring to an undesirable position. That’s why we use the benefits of both solid and a liquid.
Should the rear duals and trailers be balanced?
Absolutely, the largest investment in tire dollars are on the rear. Typically, even when loaded, duals carry less weight per tire and are prone to pounding. This causes excessive heat build-up and excessive, erratic tire wear. Centramatics help cool the duals and one pair of balancers handles four tires, wheels, hubs, and drums. Rear drums are a major cause of imbalance on dual assemblies.
Can Centramatics help tires that are already cupped?
Depending on the severity. Tires that are severely cupped will receive marginal results. While tires that are slightly cupped will true out. The balancers cannot grow rubber back where it is gone nor will it make the deeper tread wear faster. One or the other would have to occur to be able to correct severe tire cupping.
How are they installed?
Simply remove the wheel, use the bolt holes as guides and reinstall the wheel. Steer axle balancers mount between the hub and wheel, while balancers for the duals mount between the dual wheels.
At what speed do Centramatics start working?
Most models start working at 20-22 mph depending on wheel diameter. This occurs long before vibration due to imbalance, which is at speeds in excess of 35 mph.
How Long do they last?
We have balancers with 1,439,716 miles on them and still in good working condition. That’s why we have a 5-year unlimited mile warranty and offer unequaled service.
What about alignments?
Alignments control the direction and travel of the tires. Vehicles must be aligned by creditable alignment facilities to exacting specifications. Pre-mature tire wear and resulting vibration occurs if proper alignment is not maintained. Worn, loose or missing suspension components must be replaced. Centramatics balance the assembly and cannot correct alignment issues. Many forms of tire wear and poor handling result from mis-alignments.
Warranty
F & F Industries, Inc., doing business as CENTRAMATIC warrants their balancers to be commercially free from any defects in material and workmanship. This warranty shall remain in force for a period of five years from the date of purchase, but shall not extend to any equipment that has been affected by damage or wear resulting from misuse, abrasion, corrosion, negligence, accident, tampering, faulty installation, inadequate maintenance, damage, casualty, or any other reason. This warranty shall not extend to equipment that has been repaired or altered in any way that affects the condition of the balancer(s).
This warranty is conditional upon the
PREPAID RETURN
of the balancer(s)claimed to be defective. Examination by CENTRAMATIC will be the sole judge as to the condition of such. If the claimed defect is verified, CENTRAMATIC will repair or replace free of charge any defective part(s) and returned to the original purchaser with transportation prepaid. If inspection of the balancer(s) does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which may include the costs of parts, labor and transportation. In no case shall CENTRAMATIC’S liability exceed the amount of the purchase price.
The buyer shall give CENTRAMATIC prompt notice of any claim to be made under this warranty. Contact the Centramatic order desk for a
RETURN AUTHORIZATION NUMBER
before returning any part to the factory. This warranty is also conditional upon the
RECEIPT OF A VALID WARRANTY REGISTRATION CARD
. The balancer(s) should be shipped PREPAID and clearly labeled with the
RETURN AUTHORIZATION NUMBER
CENTRAMATIC.
Shipments that are received without a return authorization number
will not
be accepted. In addition (NO) other locations (For Example Truck Parts World or other distributors) are authorized to cover warranties.
The buyer’s exclusive remedy against CENTRAMATIC for the breach of any obligation under this sales contract, whether derived from warranty or otherwise shall be limited as specified herein to repair, replacement or refund at CENTRAMATIC’S sole option. CENTRAMTIC shall not be liable for any other damages or losses, including, but not limited to, incidental or consequential damages for injury to persons, products, buildings, contents of buildings or any other property, lost profits or sales or for any other direct, incidental or consequential loss.
The foregoing warranty shall be exclusive and shall be in lieu of any other warranty, written or oral, expressed or implied, including, but not limited to any implied warranty of either merchant ability or fitness for a particular purpose.