-40%

Coats 1250-2D Tire Balancer with Warranty - Remanufactured

$ 1477.87

Availability: 100 in stock
  • Country/Region of Manufacture: United States
  • Brand: Coats
  • Returns Accepted: ReturnsNotAccepted
  • Type: Wheel Balancer
  • Manufacturer Part Number: 1250-2D
  • Warranty: Yes
  • Condition: Seller refurbished

    Description

    Remanufactured
    Coats 1250-2D
    Wheel Balancer
    A High Volume Solution
    What Makes Us Different Is Our Process
    Our Machines Are More Than A Quick Paint Job
    True Rebuilds Require The Following
    ·
    Balancer is completely disassembled down to the Frame.
    ·
    Frame is stripped, primed and repainted with original factory paint.
    ·
    Direct Drive Motor is disassembled and cleaned thoroughly and then repainted and tested.
    ·
    Encoder is checked for proper function and replaced with
    NEW
    as needed.
    ·
    Cooling Fan is cleaned and tested.
    ·
    PCB Board is taken off the Control Panel and cleaned and tested with factory diagnostic equipment to meet load ratings.
    ·
    Control Panel is cleaned and tested with Factory Diagnostic Equipment specific to this panel.
    ·
    Motor Control Boards tested with Diagnostic Equipment.
    ·
    Limit Switches are tested and replaced with
    NEW
    as needed.
    ·
    ALL
    Plastic Trim ? Hood ? Tray ? Shroud on Motor ? Cone Holder ? Screen Holder are cleaned and refinished.
    ·
    Each Cone Set and Hub Nut that comes with the Balancer is sand blasted clean and checked for defects. Then tested to ensure they fit Balancer Shaft for accurate balancing.
    ·
    Each hub is cleaned and relubricated.
    ·
    After the Balancer is reassembled it is recalibrated and tested a minimum of 50 times with various size rims and tires to ensure the Motor Mount Piezos are reading true and
    the overall performance of the Balancer is ready for daily operation.
    ·
    All
    Factory Labels are replaced with Brand
    NEW
    Labels
    ·
    Complete PDF copies of the Operator and Spare Parts Manuals come with each machine.
    ·
    The Balancer is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.
    All Balancers include
    1 Year parts warranty On Drive Motor
    90 Days parts warranty on Remaining Major Components
    With Full Technical Support
    Key Features
    Automatic offset and diameter data entry for both clip and Tape-A-Weight? increases productivity and provides accuracy for single-spin balances.
    Direct Tape-A-Weight? placement and laser-guided operation eliminates guesswork, resulting in single-spin Tape-A-Weight? balances.
    Easy behind-the-spoke weight placement helps maintain a ?clean? look on custom wheels.
    1.5 HP Direct Drive motor delivers best-in-class speed, accuracy and longevity.
    Control panel with easy-to-read position indicators and an integrated VFD screen delivers ease of use and promotes proper balancing techniques.
    Direct-select any of eight balancing modes, including several alloy options, plus patch balance.
    Simultaneous display of static and dynamic data identifies any excess residual static imbalance, and helps technicians eliminate this leading cause of comebacks.
    Specifications
    Balancing Modes
    8
    Tire Diameter
    Up to 44"
    Rim Width
    Rim diameter
    2" to 20"
    8" to 30"
    Max. Tire Wt.
    160 lbs.
    Shaft Diameter
    28mm or 40mm
    Shaft Length
    8-5/8"
    Resolution: Oz.
    0.01
    Resolution: Degrees
    1.4
    Accuracy: Oz.
    0.1
    Power Requirement
    220v AC, 1P, 60Hz
    220v AC, 3P, 60Hz
    Accessory Storage
    Optional Peg Kit (8111480)
    Footprint
    57"W x 50"D
    Shipping Weight
    625 lbs.
    REMANUFACTURED BY:
    ®
    Industrial Engineered Solutions
    BUY NOW -
    99.00
    Remanufacturing Service Available
    for your Coats
    ®
    , Corghi
    ®
    , or John Bean
    ®
    Tire Equipment
    (Please visit our store for more information)
    Trade in
    your tire equipment for one of our completely rebuilt units...
    We also purchase used tire equipment
    We are the largest tire equipment rebuilder in the US
    SEND A MESSAGE FOR DISCOUNTS ON PURCHASES OF MULTIPLE MACHINES
    --  9.00 Shipping  --
    Shipping Cost
    for this item is to most locations in the US and Canada
    Certain remote locations may require additional cost
    Shipping costs includes delivery of your order to a business address
    with a dock or other way to load or unload truck
    Liftgate, Residential, and Limited Access Delivery
    require additional costs if needed for shipment.
    ALL MAJOR CREDIT OR DEBIT CARDS ACCEPTED
    Please send a message with any questions you may have
    9 am - 5 pm Eastern Time
    Monday - Friday
    Yes we ship International
    Additional shipping cost applies - Call for Quote
    Please visit our store for more tire maintenance equipment
    Click here
    to add us to your eBay favorites list.
    Seller reserves the right to withdraw item from auction at anytime due to prior sale.
    IES sells Quality remanufactured products
    The contents of this EBAY listing refers to remanufactured products and/or equipment.
    IES takes pride in the extensive rebuilding efforts its trained technicians provide for every piece of equipment sold.
    Each product listing details the remanufacturing process IES uses for each product it sells.
    The products sold on EBAY have not been endorsed by or approved by the original manufacturer and the products do not fall under the original manufacturer's warranty.
    Where indicated, IES provides buyer protection for a parts warranty and full technical support.
    COATS®, ROBO-ARM®, RIM CLAMP®, GRIP-MAX®, and other trademarks are registered trademarks owned by Hennessy Industries, Inc.